Grunnverð á sterkbyggðum ramma, með eftirfarandi einingum.

  • 2 units garden cube frames from spruce 3 x 4 m + 3 x 2 m;
  • Roof covered with bitumen weld coating (black color);
  • 1 insulated wall in which is montering tempered glass door for sauna;
  • Four spaces inside: a sauna room (2 x 2 m); lounge room (3 x 3 m); a shower room (1 x 3 m); changing room (1 x 2 m);
  • Heat-resistant plates for the heater/stove;
  • Aluminium sliding doors system (3 rails) Alutech.
  • 13 standard full panel walls;
  • 7 insulated full panel walls;
  • Insulated all roof panels;
  • 2 sauna benches from deciduous wood;
  • Inside glass door for sauna;
  • Shower room door;
  • Changing room doors/partition;
  • Verð er án hitara
  • Val um viðar- eða rafmagnsofn
  • Lögun: Ferkantað


PRODUCT DESCRIPTION This sauna cube is made from two connected frames: 3286 x 4286 mm + 3286 x 2286 mm. The frame is made from glue laminated spruce beams. Frame consists of bottom frame (100 x 140 mm), columns (140 x 140 mm), top frame (140 x 240 mm) and withstands 442 kg/m2 roof load.

The walls. The 1000 x 2200 mm walls are made of spruce wood from FSC-certified spruce forests of Northern Europe. The light, golden-white spruce are ideal for Cubes constructions designs. Standard full panel wall. Wall frame 75 x 45 mm, panel covered with inside 96 x 12 mm and outside 145 x 18 mm horizontal spruce cladding boards. Insulated full panel wall. Insulation – 50 mm (stone wool). Wall frame 75 x 45 mm, panel covered with inside 96 x 12 mm and outside 145 x 18 mm horizontal spruce cladding boards.

The roof. The roof panels are built with double rafters construction and covered with 18 x 145 mm finishing boards. This construction withstands 442 kg/m2. All Viking cube buildings roof are 2.7 m high and 1.310 (2.29%) slope. We use an hydro-insulating SBS to ensure the highest level of waterproofing. It is produced in two types: surfaced with quartz sand – for the bottom layer of the roofing and surfaced with slate that ensures perfect UV-protection – for the top hydro insulating protective layer of the roofing for cube roofs.

Inside sauna: 2 sauna benches 500 x 2136 mm (W x L) is made from deciduous wood; Sauna room volume is 17 m3. The Aluminum sliding doors system (3 rails) is 3000 x 2000 mm. Wooden door for shower (from spruce) – 990 x 2195 mm; Glass door for sauna room – 698 x 1855 mm.

Aluminium sliding doors system Alutech. Sliding parts are framed with aluminum frames, manufactured from ‘’cold’’ single-chamber of aluminium profile with non-insulating gaskets. Sliding of the aluminum frame is made so that the entire structure is stable. Frames wheels designed for attachment to the motion and has aluminum profiles for vertical and horizontal adjustment, provides a particularly easy movement of moving parts. Sealing brush prevents dust from entering the structure and compensates for vibration in the wind. All moving parts are very easy to remove and put it back, so there is no problem with cleaning glass from the outside. In the closed position system has automatically locked and unlocked positions. Handles and locks built into the aluminum profile, so during the opening, the glass always remains clean.

People persons
Timber Spruce
Shape Rectangle
Room 4
Inside area 18.0m2
Sauna area 4.0m2
Total height 2780mm
Wall height 2200mm
Floor thickness 28mm
Exterior Cladding 18mm
Interior Cladding 12mm
Wall thickness 75mm
Insulation 50mm stone wool
External dimension 3286 x 4286 + 3286 x 2286mm
Door size 3000 x 2200 mm
Interior tinted glass door 620 x 1800mm
2 units garden cube frames from spruce 3×4 m +3×2 m
Roof covered with bitumen weld coating;
17 standard full panel walls;
7 standard insulated full panel walls;
Insulated roof panels;
2 sauna benches from deciduous wood;
Four spaces inside: a sauna room, lounge room, a shower room, changing room
Heat-resistant plates for the heater/stove;
Inside glass door for sauna;
Wooden shower room door;
Wooden changing room door;
Aluminium sliding doors system (3 rails) Alutech.
Assembling time 11hours
Size of pallets (LxWxH) 1st pallet 3.4 x 1.2 x 2.6 and 2nd pallet – 4.4 x 1.2 x 2.6m

Sauna Cube 3 x 6 m  with Lounge Room is delivered to the customer not assembled but with detailed assembly instructions and drawings, and packed on a pallets (KIT). Two or three people can easily assemble Sauna Cube 3 x 6  in 11  hours.

It is very important to have a proper foundation for your sauna. Therefore we recommend making the foundation according to the sketches here.

First of all, foundation must be prepared according to the landscape and ground conditions. Consult a qualified builder or an engineer to prepare a proper foundation, which fits your location.

Make sure to complete the site preparation and the foundation before unpacking and assembling the Sauna Cube 3 x 6 m.


  • If you have wood burning heater, make sure to remove the protective film of the heater chimney before heating.
  • Check the Sauna before heating. No flammable objects must be left on or near the heater.
  • Check that there is water in the water tank (if you are using it).
  • Ensure that the Sauna door is unlocked and easy to open before using it. If necessary, sauna door must be adjusted by the customer.
  • Do not mount any additional accessories or shelves above the heater.
  • Turn the Sauna heater on.
  • The thermometer should be located at head level in the Sauna. It should be further away from the heater, so it does not give a false reading.
  • Wait for the Sauna to reach the required temperature (normally 80-90º C).

All users should be aware of the potential dangers and requirements prior to participation in the Sauna!


Enjoy the many health benefits of the relaxing heat of your Sauna. But remember: being inside the hot Sauna for long periods of time raises your body temperature, which may be dangerous, especially for those with a heart condition or other health risks. Generally, therecommended time inside a Sauna is from 10 to 15 minutes. After a period of heating, take a 5 minute break and then repeat. Also:

  • Familiarize yourself with the safety instructions and keep away from the heater when it is hot.
  • Be very careful when moving in the Sauna, as the benches and floors may be slippery!
  • The Sauna should not be used by pregnant women or very young children.
  • Remove all jewelry before entering the hot Sauna.


Wood is a natural material and can change through time. Cracks of various sizes, structural or color changes are not the defects – rather, they are features of the wood. Natural wood (not impregnated) becomes grayish after being left untouched for a while. Later it can turnblue and get covered with mold.

  • Impregnate and paint the wood to protect the product from outside. We recommend to inspect Sauna every 6 month and evaluate need of re-impregnation, re-painintg.
  • When not in use, keep a bucket full of water in the Sauna during summer.
  • Doors of the Sauna must be adjusted regulary.
  • You should keep the sauna ventilation open all the time, to allow it time to dry and air out to avoid mold.
  • To remove bench stains, use a mild soapy water and a soft cotton cloth. This can also be used on the heater itself – just make sure it’s off and completely cool when you clean it.
  • Don’t use harsh or abrasive chemicals on benches, as these can bleach and warp the wood, ruining the grain and turning it grey.

With these simple maintenance tips your Sauna will stay inviting, fresh, and enjoyable!

SKU: GSC3X6 Categories: , , , , , , Tag: